-<?xml version="1.0"?>\r
-<!DOCTYPE MODE SYSTEM "xmode.dtd">\r
-\r
-<!--\r
-\r
- redcode syntax highlighting file for jedit\r
-\r
- Will Varfar, 2002\r
-\r
--->\r
-\r
-<MODE>\r
-\r
- <PROPS>\r
- <PROPERTY NAME="lineComment" VALUE=";" />\r
- </PROPS>\r
-\r
- <RULES HIGHLIGHT_DIGITS="TRUE" DEFAULT="MARKUP" IGNORE_CASE="TRUE">\r
-\r
- <EOL_SPAN TYPE="COMMENT2">;redcode</EOL_SPAN>\r
- <EOL_SPAN TYPE="COMMENT2">;author</EOL_SPAN>\r
- <EOL_SPAN TYPE="COMMENT2">;name</EOL_SPAN>\r
- <EOL_SPAN TYPE="COMMENT2">;strategy</EOL_SPAN>\r
- <EOL_SPAN TYPE="COMMENT2">;password</EOL_SPAN>\r
- <EOL_SPAN TYPE="COMMENT1">;</EOL_SPAN>\r
-\r
- <SEQ TYPE="KEYWORD3">.AB</SEQ> <!-- Instructions read the A-field of the A-instruction and the B-field of the B-instruction and write to B-fields. -->\r
- <SEQ TYPE="KEYWORD3">.BA</SEQ> <!-- Instructions read the B-field of the A-instruction and the A-field of the B-instruction and write to A-fields. -->\r
- <SEQ TYPE="KEYWORD3">.A</SEQ> <!--Instructions read and write A-fields. -->\r
- <SEQ TYPE="KEYWORD3">.B</SEQ> <!-- Instructions read and write B-fields. -->\r
- <SEQ TYPE="KEYWORD3">.F</SEQ> <!-- Instructions read both A- and B-fields of the the A- and B-instruction and write to both A- and B-fields (A to A and B to B). -->\r
- <SEQ TYPE="KEYWORD3">.X</SEQ> <!-- Instructions read both A- and B-fields of the the A- and B-instruction and write to both A- and B-fields exchanging fields (A to B and B to A). -->\r
- <SEQ TYPE="KEYWORD3">.I</SEQ> <!-- Instructions read and write entire instructions. -->\r
-\r
- <SEQ TYPE="OPERATOR">,</SEQ>\r
- <SEQ TYPE="OPERATOR">:</SEQ>\r
- <SEQ TYPE="OPERATOR">(</SEQ>\r
- <SEQ TYPE="OPERATOR">)</SEQ>\r
-\r
- <!-- Arithmetic: -->\r
- <SEQ TYPE="OPERATOR">+</SEQ> <!-- addition or unary plus -->\r
- <SEQ TYPE="OPERATOR">-</SEQ> <!-- subtraction or unary minus -->\r
- <SEQ TYPE="OPERATOR">/</SEQ> <!-- division -->\r
- <SEQ TYPE="OPERATOR">%</SEQ> <!-- modulo (remainder of division) -->\r
-\r
- <!-- Comparison (*): -->\r
- <SEQ TYPE="OPERATOR">==</SEQ> <!-- equality -->\r
- <SEQ TYPE="OPERATOR">!=</SEQ> <!-- inequality -->\r
- <SEQ TYPE="OPERATOR"><=</SEQ> <!-- less than or equal -->\r
- <SEQ TYPE="OPERATOR">>=</SEQ> <!-- greater than or equal -->\r
- <SEQ TYPE="OPERATOR"><</SEQ> <!-- less than -->\r
- <SEQ TYPE="OPERATOR">></SEQ> <!-- greater than -->\r
-\r
- <!-- Logical (*): -->\r
- <SEQ TYPE="OPERATOR">&&</SEQ> <!-- and -->\r
- <SEQ TYPE="OPERATOR">||</SEQ> <!-- or -->\r
- <SEQ TYPE="OPERATOR">!</SEQ> <!-- unary negation -->\r
-\r
- <!-- Assignment (*): -->\r
- <SEQ TYPE="OPERATOR">=</SEQ> <!-- (to register variables a..z) -->\r
-\r
-\r
- <SEQ TYPE="LITERAL1">$</SEQ>\r
- <SEQ TYPE="LITERAL1">@</SEQ>\r
- <SEQ TYPE="LITERAL1">#</SEQ>\r
- <SEQ TYPE="LITERAL1">*</SEQ>\r
- <SEQ TYPE="LITERAL1">{</SEQ>\r
- <SEQ TYPE="LITERAL1">}</SEQ>\r
-\r
- <KEYWORDS>\r
-\r
- <LITERAL2>CORESIZE</LITERAL2> <!-- value of -s parameter (default: 8000) -->\r
- <LITERAL2>MAXPROCESSES</LITERAL2> <!-- value of -p parameter (default: 8000) -->\r
- <LITERAL2>MAXCYCLES</LITERAL2> <!-- value of -c parameter (default: 80000) -->\r
- <LITERAL2>MAXLENGTH</LITERAL2> <!-- value of -l parameter (default: 100) -->\r
- <LITERAL2>MINDISTANCE</LITERAL2> <!-- value of -d parameter (default: 100) -->\r
- <LITERAL2>ROUNDS</LITERAL2> <!-- (+) value of -r parameter (default: 1) -->\r
- <LITERAL2>PSPACESIZE</LITERAL2> <!-- (+) value of -S parameter (default: 1/16th CORESIZE) -->\r
- <LITERAL2>CURLINE</LITERAL2> <!-- current line in generated assembly (starts with 0) -->\r
- <LITERAL2>VERSION</LITERAL2> <!-- pMARS version ("60" is v0.6.0) -->\r
- <LITERAL2>WARRIORS</LITERAL2> <!-- number of warriors specified on command line -->\r
-\r
- <KEYWORD1>DAT</KEYWORD1> <!-- terminate process -->\r
- <KEYWORD1>MOV</KEYWORD1> <!-- move from A to B -->\r
- <KEYWORD1>ADD</KEYWORD1> <!-- add A to B, store result in B -->\r
- <KEYWORD1>SUB</KEYWORD1> <!-- subtract A from B, store result in B -->\r
- <KEYWORD1>MUL</KEYWORD1> <!-- multiply A by B, store result in B -->\r
- <KEYWORD1>DIV</KEYWORD1> <!-- divide B by A, store result in B if A <> 0, else terminate -->\r
- <KEYWORD1>MOD</KEYWORD1> <!-- divide B by A, store remainder in B if A <> 0, else terminate -->\r
- <KEYWORD1>JMP</KEYWORD1> <!-- transfer execution to A -->\r
- <KEYWORD1>JMZ</KEYWORD1> <!-- transfer execution to A if B is zero -->\r
- <KEYWORD1>JMN</KEYWORD1> <!-- transfer execution to A if B is non-zero -->\r
- <KEYWORD1>DJN</KEYWORD1> <!-- decrement B, if B is non-zero, transfer execution to A -->\r
- <KEYWORD1>SPL</KEYWORD1> <!-- split off process to A -->\r
- <KEYWORD1>SLT</KEYWORD1> <!-- skip next instruction if A is less than B -->\r
- <KEYWORD1>CMP</KEYWORD1> <!-- same as SEQ -->\r
- <KEYWORD1>SEQ</KEYWORD1> <!-- (*) Skip next instruction if A is equal to B -->\r
- <KEYWORD1>SNE</KEYWORD1> <!-- (*) Skip next instruction if A is not equal to B -->\r
- <KEYWORD1>NOP</KEYWORD1> <!-- (*) No operation -->\r
- <KEYWORD1>LDP</KEYWORD1> <!-- (+) Load P-space cell A into core address B -->\r
- <KEYWORD1>STP</KEYWORD1> <!-- (+) Store A-number into P-space cell B -->\r
-\r
- <KEYWORD2>EQU</KEYWORD2>\r
- <KEYWORD2>ORG</KEYWORD2>\r
- <KEYWORD2>FOR</KEYWORD2>\r
- <KEYWORD2>ROF</KEYWORD2>\r
- <KEYWORD2>END</KEYWORD2>\r
- <KEYWORD2>PIN</KEYWORD2>\r
- <KEYWORD2>CORESIZE</KEYWORD2> <!-- value of -s parameter (default: 8000) -->\r
- <KEYWORD2>MAXPROCESSES</KEYWORD2> <!-- value of -p parameter (default: 8000) -->\r
- <KEYWORD2>MAXCYCLES</KEYWORD2> <!-- value of -c parameter (default: 80000) -->\r
- <KEYWORD2>MAXLENGTH</KEYWORD2> <!-- value of -l parameter (default: 100) -->\r
- <KEYWORD2>MINDISTANCE</KEYWORD2> <!-- value of -d parameter (default: 100) -->\r
- <KEYWORD2>ROUNDS</KEYWORD2> <!-- (+) value of -r parameter (default: 1) -->\r
- <KEYWORD2>PSPACESIZE</KEYWORD2> <!-- (+) value of -S parameter (default: 1/16th CORESIZE) -->\r
- <KEYWORD2>CURLINE</KEYWORD2> <!-- current line in generated assembly (starts with 0) -->\r
- <KEYWORD2>VERSION</KEYWORD2> <!-- pMARS version ("60" is v0.6.0) -->\r
- <KEYWORD2>WARRIORS</KEYWORD2> <!-- number of warriors specified on command line -->\r
-\r
- </KEYWORDS>\r
-\r
- </RULES>\r
-\r
-</MODE>\r
-\r
-\r
+<?xml version="1.0"?>
+<!DOCTYPE MODE SYSTEM "xmode.dtd">
+
+<!--
+
+ redcode syntax highlighting file for jedit
+
+ Will Varfar, 2002
+
+-->
+
+<MODE>
+
+ <PROPS>
+ <PROPERTY NAME="lineComment" VALUE=";" />
+ </PROPS>
+
+ <RULES HIGHLIGHT_DIGITS="TRUE" DEFAULT="MARKUP" IGNORE_CASE="TRUE">
+
+ <EOL_SPAN TYPE="COMMENT2">;redcode</EOL_SPAN>
+ <EOL_SPAN TYPE="COMMENT2">;author</EOL_SPAN>
+ <EOL_SPAN TYPE="COMMENT2">;name</EOL_SPAN>
+ <EOL_SPAN TYPE="COMMENT2">;strategy</EOL_SPAN>
+ <EOL_SPAN TYPE="COMMENT2">;password</EOL_SPAN>
+ <EOL_SPAN TYPE="COMMENT1">;</EOL_SPAN>
+
+ <SEQ TYPE="KEYWORD3">.AB</SEQ> <!-- Instructions read the A-field of the A-instruction and the B-field of the B-instruction and write to B-fields. -->
+ <SEQ TYPE="KEYWORD3">.BA</SEQ> <!-- Instructions read the B-field of the A-instruction and the A-field of the B-instruction and write to A-fields. -->
+ <SEQ TYPE="KEYWORD3">.A</SEQ> <!--Instructions read and write A-fields. -->
+ <SEQ TYPE="KEYWORD3">.B</SEQ> <!-- Instructions read and write B-fields. -->
+ <SEQ TYPE="KEYWORD3">.F</SEQ> <!-- Instructions read both A- and B-fields of the the A- and B-instruction and write to both A- and B-fields (A to A and B to B). -->
+ <SEQ TYPE="KEYWORD3">.X</SEQ> <!-- Instructions read both A- and B-fields of the the A- and B-instruction and write to both A- and B-fields exchanging fields (A to B and B to A). -->
+ <SEQ TYPE="KEYWORD3">.I</SEQ> <!-- Instructions read and write entire instructions. -->
+
+ <SEQ TYPE="OPERATOR">,</SEQ>
+ <SEQ TYPE="OPERATOR">:</SEQ>
+ <SEQ TYPE="OPERATOR">(</SEQ>
+ <SEQ TYPE="OPERATOR">)</SEQ>
+
+ <!-- Arithmetic: -->
+ <SEQ TYPE="OPERATOR">+</SEQ> <!-- addition or unary plus -->
+ <SEQ TYPE="OPERATOR">-</SEQ> <!-- subtraction or unary minus -->
+ <SEQ TYPE="OPERATOR">/</SEQ> <!-- division -->
+ <SEQ TYPE="OPERATOR">%</SEQ> <!-- modulo (remainder of division) -->
+
+ <!-- Comparison (*): -->
+ <SEQ TYPE="OPERATOR">==</SEQ> <!-- equality -->
+ <SEQ TYPE="OPERATOR">!=</SEQ> <!-- inequality -->
+ <SEQ TYPE="OPERATOR"><=</SEQ> <!-- less than or equal -->
+ <SEQ TYPE="OPERATOR">>=</SEQ> <!-- greater than or equal -->
+ <SEQ TYPE="OPERATOR"><</SEQ> <!-- less than -->
+ <SEQ TYPE="OPERATOR">></SEQ> <!-- greater than -->
+
+ <!-- Logical (*): -->
+ <SEQ TYPE="OPERATOR">&&</SEQ> <!-- and -->
+ <SEQ TYPE="OPERATOR">||</SEQ> <!-- or -->
+ <SEQ TYPE="OPERATOR">!</SEQ> <!-- unary negation -->
+
+ <!-- Assignment (*): -->
+ <SEQ TYPE="OPERATOR">=</SEQ> <!-- (to register variables a..z) -->
+
+
+ <SEQ TYPE="LITERAL1">$</SEQ>
+ <SEQ TYPE="LITERAL1">@</SEQ>
+ <SEQ TYPE="LITERAL1">#</SEQ>
+ <SEQ TYPE="LITERAL1">*</SEQ>
+ <SEQ TYPE="LITERAL1">{</SEQ>
+ <SEQ TYPE="LITERAL1">}</SEQ>
+
+ <KEYWORDS>
+
+ <LITERAL2>CORESIZE</LITERAL2> <!-- value of -s parameter (default: 8000) -->
+ <LITERAL2>MAXPROCESSES</LITERAL2> <!-- value of -p parameter (default: 8000) -->
+ <LITERAL2>MAXCYCLES</LITERAL2> <!-- value of -c parameter (default: 80000) -->
+ <LITERAL2>MAXLENGTH</LITERAL2> <!-- value of -l parameter (default: 100) -->
+ <LITERAL2>MINDISTANCE</LITERAL2> <!-- value of -d parameter (default: 100) -->
+ <LITERAL2>ROUNDS</LITERAL2> <!-- (+) value of -r parameter (default: 1) -->
+ <LITERAL2>PSPACESIZE</LITERAL2> <!-- (+) value of -S parameter (default: 1/16th CORESIZE) -->
+ <LITERAL2>CURLINE</LITERAL2> <!-- current line in generated assembly (starts with 0) -->
+ <LITERAL2>VERSION</LITERAL2> <!-- pMARS version ("60" is v0.6.0) -->
+ <LITERAL2>WARRIORS</LITERAL2> <!-- number of warriors specified on command line -->
+
+ <KEYWORD1>DAT</KEYWORD1> <!-- terminate process -->
+ <KEYWORD1>MOV</KEYWORD1> <!-- move from A to B -->
+ <KEYWORD1>ADD</KEYWORD1> <!-- add A to B, store result in B -->
+ <KEYWORD1>SUB</KEYWORD1> <!-- subtract A from B, store result in B -->
+ <KEYWORD1>MUL</KEYWORD1> <!-- multiply A by B, store result in B -->
+ <KEYWORD1>DIV</KEYWORD1> <!-- divide B by A, store result in B if A <> 0, else terminate -->
+ <KEYWORD1>MOD</KEYWORD1> <!-- divide B by A, store remainder in B if A <> 0, else terminate -->
+ <KEYWORD1>JMP</KEYWORD1> <!-- transfer execution to A -->
+ <KEYWORD1>JMZ</KEYWORD1> <!-- transfer execution to A if B is zero -->
+ <KEYWORD1>JMN</KEYWORD1> <!-- transfer execution to A if B is non-zero -->
+ <KEYWORD1>DJN</KEYWORD1> <!-- decrement B, if B is non-zero, transfer execution to A -->
+ <KEYWORD1>SPL</KEYWORD1> <!-- split off process to A -->
+ <KEYWORD1>SLT</KEYWORD1> <!-- skip next instruction if A is less than B -->
+ <KEYWORD1>CMP</KEYWORD1> <!-- same as SEQ -->
+ <KEYWORD1>SEQ</KEYWORD1> <!-- (*) Skip next instruction if A is equal to B -->
+ <KEYWORD1>SNE</KEYWORD1> <!-- (*) Skip next instruction if A is not equal to B -->
+ <KEYWORD1>NOP</KEYWORD1> <!-- (*) No operation -->
+ <KEYWORD1>LDP</KEYWORD1> <!-- (+) Load P-space cell A into core address B -->
+ <KEYWORD1>STP</KEYWORD1> <!-- (+) Store A-number into P-space cell B -->
+
+ <KEYWORD2>EQU</KEYWORD2>
+ <KEYWORD2>ORG</KEYWORD2>
+ <KEYWORD2>FOR</KEYWORD2>
+ <KEYWORD2>ROF</KEYWORD2>
+ <KEYWORD2>END</KEYWORD2>
+ <KEYWORD2>PIN</KEYWORD2>
+ <KEYWORD2>CORESIZE</KEYWORD2> <!-- value of -s parameter (default: 8000) -->
+ <KEYWORD2>MAXPROCESSES</KEYWORD2> <!-- value of -p parameter (default: 8000) -->
+ <KEYWORD2>MAXCYCLES</KEYWORD2> <!-- value of -c parameter (default: 80000) -->
+ <KEYWORD2>MAXLENGTH</KEYWORD2> <!-- value of -l parameter (default: 100) -->
+ <KEYWORD2>MINDISTANCE</KEYWORD2> <!-- value of -d parameter (default: 100) -->
+ <KEYWORD2>ROUNDS</KEYWORD2> <!-- (+) value of -r parameter (default: 1) -->
+ <KEYWORD2>PSPACESIZE</KEYWORD2> <!-- (+) value of -S parameter (default: 1/16th CORESIZE) -->
+ <KEYWORD2>CURLINE</KEYWORD2> <!-- current line in generated assembly (starts with 0) -->
+ <KEYWORD2>VERSION</KEYWORD2> <!-- pMARS version ("60" is v0.6.0) -->
+ <KEYWORD2>WARRIORS</KEYWORD2> <!-- number of warriors specified on command line -->
+
+ </KEYWORDS>
+
+ </RULES>
+
+</MODE>
+
+
projects / factor.git / blobdiff